09-27-2007, 09:17 PM
Before, CIntros required flashing and resulted in permanent bricks on 3.10+ OE.
Now you can use CIntros without having to flash anything to your PSP.
Instructions:
1. Copy the contents of the MS_ROOT folder to your memory stick. Note: If you end up with an MS_ROOT folder, you did it wrong.
2. Copy the pmf that you want to the PSP/SYSTEM/INTRO folder on your memory stick. The pmf should be named intro.pmf (overwrite the existing one)
4. Enter Recovery Mode (Hold R while booting up)
5. Under Configuration, enable "Autorun program at /PSP/GAME/BOOT/EBOOT.PBP"
6. "Game folder homebrew" should be set to "1.50 Kernal"
7. It is also a good idea to enable "Skip SCE logo," unless you want the Sony logo appearing after your CIntro.
Thanks to Piccahoe & Shadowz.
More thanks to Sorin P, C, and Dark_AleX.
Now you can use CIntros without having to flash anything to your PSP.
Instructions:
1. Copy the contents of the MS_ROOT folder to your memory stick. Note: If you end up with an MS_ROOT folder, you did it wrong.
2. Copy the pmf that you want to the PSP/SYSTEM/INTRO folder on your memory stick. The pmf should be named intro.pmf (overwrite the existing one)
4. Enter Recovery Mode (Hold R while booting up)
5. Under Configuration, enable "Autorun program at /PSP/GAME/BOOT/EBOOT.PBP"
6. "Game folder homebrew" should be set to "1.50 Kernal"
7. It is also a good idea to enable "Skip SCE logo," unless you want the Sony logo appearing after your CIntro.
Thanks to Piccahoe & Shadowz.
More thanks to Sorin P, C, and Dark_AleX.